Basic Info.
Application
Insulators, Winding Wire Coating Insulation
Thickness
2.8mm; 3.0mm; 3.2mm
Construction
3lpe System or 2lpe System
Raw Material
Radiation Cross Linked PE
Working Temperature
60 Centigrade or 80 Centigrade
Type
Insulation Sleeve & Tube
Chemistry
Hybrid Insulation
Classification
Hybrid Insulation Materials
Specification
DN406*500*2.5mm
Product Description
Horizontal Directional Drilling Crossing Heat Shrinkable Sleeves
Product description:Dasheng DIRAX system is a wrap-around heat-shrinkable sleeve reinforced with fiberglass similar with Raychem DIRAX, it is designed to protect girth welds against corrosion and is the optimum joint protection for PE and FBE coated pipes used in Horizontal Directional Drilling (HDD-Pull Through)
applications. The reinforcement gives the backing greater wear resistance.
Construction: Three-layer system
* First layer: Liquid epoxy, solvent-free two-component.
* Second layer: High shear strength copolymer adhesive.
* Third layer: Thick, fiberglass reinforced, radiation cross-linked polyethylene.
* Additional component: Wear Cone as extra protection against pull- through forces, of the same construction as the main sleeve.During installation, the epoxy is applied to the prepared pipe surface and the heat-shrinkable sleeve is immediately wrapped around the joint over the wet epoxy. Heat is then applied to the sleeve, which shrinks to form a tight fit around the joint. While curing, the epoxy forms strong mechanical and chemical bonds to the pipe surface & to the copolymer adhesive layer. The radiation cross-linked outer layer forms a tough barrier against mechanical damage and moisture transmission. A wear cone is then applied over the leading edge of the sleeve.
Features:
* Highly resistant to shear and peel forces induced by soil and thermal movements.
* DIRAX offers abrasion and wear resistance at pull-through comparable to mill coatings.
* Wear cone protects leading edge of sleeve against pull-through forces.
* Sleeve applied over wet epoxy---there are no curing or waiting times /formation of strong mechanical & chemical bonds.
* Superior cathodic disbondment and hot water immersion resistance.
* Independent closure patch.
* Low preheat requirements.
Benefits:
· The DIRAX is tough! · Provides a monolithic coating system.
· Provides additional strength and security---increases reliability.
· Allows fast application---saves time! Ensures high performance!
· Offers the optimum barrier protection against corrosion.
· Allows fast and easy application.
· Makes installation faster and saves time.| Product selection guide |
| Max operating temperature | 65C (149°F). |
| Compatible line coatings | PE, FBE |
| Min. preheat temperature | 70°C (158°F) |
| Recommended pipe preparation | Sa 2½ |
Soil stress restrictions
Performance | EN 12068 Class C60 UV |
| Product thickness | mm | in |
| Backing as supplied | 1.6 | 0.063 |
| Backing fully free recovered | 2.3 | 0.091 |
| Adhesive as supplied | 1.2 | 0.047 |
| Wear cone (incl.adhesive) as supplied | 2.8 | 0.11 |
| Backing |
| Property | Test method | Typical value |
| Bursting strength | DIN 30672 | 2200 N |
| Adhesive | | |
| Property | Test method | Typical value |
| Softening Point | ASTM E-28 | 95°C |
Lap shear
Lap shear | ASTM D-1002
EN 12068@10mm/min. | 500 psi
0.34 N/mm2 @ 60°C(140°F) |
| Installed sleeve |
| Property | Test method | Typical value |
| Peel to Steel | ASTM D-1000 EN 12068 @10mm/min. | 104 pli 11 N/mm |
| Specific coating resistance | EN12068,
100 days immersion | 6x109 Wm2 |
| Impact resistance | ASTM G-14
EN 12068, class C | 170 in.lb
Pass 30 J |
| Indentation resistance | ASTM G-17,EN 12068, class C | Pass 2.3 mm* @ 60°C (140°F) |
| Cathodic disbondment | ASTM G-
8, 30 days EN 12068, 30 days | 0.170" (4.33 mm) < 1 mm radius @ 60°C (140°F)-self healing |
Resistance to UV radiation followed by
bursting strength | EN12068 | Reduction in bursting strength
<25% of the original value |
| NO. | Product specifications and dimensions | heat shrink sleeve
length (mm) | Closure Patch
Width (mm) | Wear Cone
Width (mm) |
| 1 | DIRAXΦ159×600 | 680 | 100 | ≥150 |
| 2 | DIRAXΦ219×600 | 900 | 100 | ≥150 |
| 3 | DIRAXΦ273×600 | 1070 | 100 | ≥150 |
| 4 | DIRAXΦ325×600 | 1260 | 100 | ≥150 |
| 5 | DIRAXΦ355×600 | 1360 | 100 | ≥150 |
| 6 | DIRAXΦ406×600 | 1520 | 150 | ≥200 |
| 7 | DIRAXΦ426×600 | 1600 | 150 | ≥200 |
| 8 | DIRAXΦ508×600 | 1900 | 150 | ≥200 |
| 9 | DIRAXΦ529×600 | 1940 | 150 | ≥200 |
| 10 | DIRAXΦ610×600 | 2220 | 150 | ≥200 |
| 11 | DIRAXΦ711×600 | 2560 | 150 | ≥200 |
| 12 | DIRAXΦ813×600 | 2880 | 150 | ≥250 |
Address:
Room A1010, Building 2, No. 588 Binhe Road, High Tech Zone, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
